Samsung Washing Machine Non-Stop Filling Water – Upper Coomera

Samsung Washing Machine Non-Stop Filling Water – Upper Coomera

A customer in Upper Coomera contacted ISB Electrical because their Samsung washing machine was filling with water non-stop. Water continued entering the machine when it should have stopped, creating a risk of overfilling and water leaking onto the laundry floor.

When a washing machine keeps filling with water, the fault can be caused by a damaged water inlet valve, faulty pressure sensor, blocked pressure hose, control board fault, wiring issue or water valve stuck open. In this case, the water inlet valve assembly was inspected and found to be faulty.

Inspection and Diagnosis

• Checked the washing machine power supply and safety condition
• Confirmed the machine was filling with water continuously
• Checked hot and cold water inlet connections
• Inspected the water inlet valve operation
• Checked whether the valve was closing correctly
• Inspected wiring and valve connections
• Checked water level control operation
• Confirmed the dual water valve was damaged and required replacement

Fault Found

The fault was caused by a damaged water inlet valve. The valve was not closing correctly, which allowed water to continue entering the Samsung washing machine.

This model requires a dual water inlet valve replacement. A faulty inlet valve can cause non-stop filling, overfilling, water entering when the machine is off, or water leaking from the dispenser area.

Repair Required

The damaged dual water valve needs to be replaced. After replacement, the washing machine should be tested through the filling stage to confirm the valve opens and closes correctly.

The customer was advised not to continue using the washing machine until the faulty water valve is replaced, as continuous filling can lead to flooding, internal water damage and damage to surrounding laundry cabinetry or flooring.

Common Causes of Washing Machine Filling Non-Stop

• Damaged water inlet valve
• Dual water valve stuck open
• Valve not closing after filling
• Faulty water level pressure sensor
• Blocked or damaged pressure hose
• Wiring fault to the inlet valve
• Main control board not switching the valve correctly
• Debris inside the water valve preventing it from sealing

Samsung Washing Machine Repairs Gold Coast

ISB Electrical provides professional Washing Machine Repairs Gold Coast, including Samsung washing machines filling non-stop, leaking water, not draining, not spinning, stopping during the cycle, showing error codes and water inlet valve faults.

We also provide Samsung Appliance Repair Gold Coast for Samsung washing machines, fridges, dishwashers, ovens, cooktops and other household appliances.

If your Samsung washing machine keeps filling with water, overfills, leaks from the dispenser or has a damaged inlet valve, contact ISB Electrical for professional diagnosis and repair in Upper Coomera and across the Gold Coast.