A customer in Southport contacted ISB Electrical because their Fisher & Paykel DishDrawer had flashing lights and was getting stuck in the middle of the cycle. The machine was not draining water completely, leaving water inside the drawer.
When a Fisher & Paykel DishDrawer flashes lights and stops mid-cycle, the fault can be caused by a drainage restriction, blocked rotor motor area, blocked drain hose, food debris in the sump, blocked filter plate, water level issue or control fault. In this case, the problem was found in the drain system.
The DishDrawer was not draining water completely because the rotor motor area and drain hose were restricted. Water could not leave the drawer properly, causing the machine to stop in the middle of the cycle and show flashing lights.
If water remains inside the DishDrawer during the drain stage, the appliance may stop the program to protect itself and alert the customer with flashing lights or beeping.
The rotor motor area was cleared and the drain hose was cleaned to restore proper water flow through the drain system.
After clearing the restriction, the DishDrawer was tested through the drain stage. Water drained correctly, and the machine was checked for normal cycle operation.
ISB Electrical provides professional Dishwasher Repairs Gold Coast, including Fisher & Paykel DishDrawers flashing lights, not draining, leaking water, stopping mid-cycle, beeping, showing F1 faults and not completing the wash cycle.
We also provide Dishwasher Repairs Southport and Fisher & Paykel Appliance Repair Gold Coast for DishDrawers, dishwashers, washing machines, dryers, ovens and fridges.
If your Fisher & Paykel DishDrawer has flashing lights, water left inside, drainage problems or gets stuck in the middle of the cycle, contact ISB Electrical for professional diagnosis and repair in Southport and across the Gold Coast.
Call ISB Electrical for Fisher & Paykel DishDrawer flashing lights, drainage faults, blocked rotor motor areas, blocked drain hoses and dishwasher repairs across the Gold Coast.
A Fisher & Paykel DishDrawer may flash lights because of a drainage fault, blocked rotor motor area, blocked drain hose, water left inside, leak detection fault or control system issue.
Yes. If the drain hose is blocked or restricted, water may not drain completely and the DishDrawer can stop in the middle of the cycle.
Yes. If debris is restricting the rotor motor area and the parts are not damaged, the area can usually be cleared and tested for normal drain operation.
Yes. ISB Electrical repairs Fisher & Paykel DishDrawers in Southport and across the Gold Coast, including flashing lights, drainage faults, water left inside, F1 faults and cycle problems.
Please feel free to contact us for
Any electrical & appliance services - installation, repairs, maintenance
© 2026 ISB Electrical. All rights reserved.