A customer in Main Beach contacted ISB Electrical because their Fisher & Paykel dryer was making loud noise during operation. The dryer was still running, but the noise became worse during the cycle.
When a dryer becomes noisy, the fault can be caused by worn drum rollers, damaged belt, pulley failure, motor bearing noise, loose fan, foreign object inside the blower housing or faulty blower fan bearings. In this case, the blower fan bearing area was inspected and tested.
The fault was caused by faulty blower fan bearings. Worn bearings can make a loud rumbling, grinding or scraping noise when the dryer is running.
The blower fan is important for moving hot air through the dryer. If the bearings fail, the dryer can become noisy, the fan may not run smoothly, and further damage can occur if the appliance continues to be used.
The blower fan bearing kit needs to be replaced. After replacing the bearing kit, the dryer should be tested to confirm smooth fan operation, correct airflow and reduced operating noise.
The customer was advised not to continue using the dryer for long periods while the blower fan bearings are faulty, as the noise may become worse and could lead to further fan or motor damage.
ISB Electrical provides professional Dryer Repairs Gold Coast, including dryers making noise, not heating, not spinning, stopping during the cycle, belt faults, pulley faults and blower fan bearing problems.
We also provide Fisher & Paykel Appliance Repair Gold Coast for Fisher & Paykel dryers, washing machines, dishwashers, DishDrawers, ovens and refrigerators.
If your Fisher & Paykel dryer is noisy, making grinding sounds, rumbling during the cycle or has faulty blower fan bearings, contact ISB Electrical for professional diagnosis and repair in Main Beach and across the Gold Coast.
Call ISB Electrical for noisy dryers, blower fan bearing faults, pulley problems, belt faults, heating problems and dryer repairs across the Gold Coast.
A Fisher & Paykel dryer may become noisy because of faulty blower fan bearings, worn drum rollers, damaged belt, pulley fault, loose fan, motor bearing noise or a foreign object inside the fan housing.
Yes. Worn blower fan bearings can make rumbling, grinding or scraping noise while the dryer is running.
Yes. If the blower fan bearings are faulty, the bearing kit can usually be replaced. After replacement, the dryer should be tested for smooth fan operation and correct airflow.
Yes. ISB Electrical repairs Fisher & Paykel dryers in Main Beach and across the Gold Coast, including noisy dryers, blower fan bearing faults, belt faults, pulley problems and heating faults.
Please feel free to contact us for
Any electrical & appliance services - installation, repairs, maintenance
© 2026 ISB Electrical. All rights reserved.