ISB Electrical attended an LG clothes dryer in Palm Beach, Gold Coast, after the customer reported two problems: the dryer was making unusual noises during operation and leaving marks on clothing.
Inspection identified damaged drum support rollers. These rollers help support the rotating drum and allow it to turn smoothly. As the rollers wear or become damaged, they can cause rumbling, scraping, vibration or irregular drum movement. Damaged support components can also contribute to contact and friction inside the dryer that may affect clothing.
Diagnosis: The drum support rollers were damaged and required replacement. This case records the fault and recommended repair; it does not claim that new rollers have already been installed.
On dryer models equipped with support rollers, the drum rotates while resting against one or more wheels or rollers. Bearings or bushes in these parts allow the drum to move smoothly as it carries a load of wet laundry. The drive belt and motor provide the rotation, but the drum supports help keep the drum correctly positioned.
Over time, a roller's running surface, bearing or mounting can deteriorate. A damaged roller may no longer turn freely or support the drum evenly. The result can be a repetitive knocking or rumbling sound, especially when the drum is carrying wet clothes.
In this Palm Beach service call, the damaged drum support rollers were identified as the mechanical fault requiring repair. When rollers are worn, the drum may move unevenly or make abnormal contact with its supporting components as it turns.
Different dryer noises can also come from a worn drive belt, tension pulley, motor bearings or foreign objects trapped near the drum. For that reason, diagnosing a noisy dryer involves checking the drum support system rather than assuming that every rumbling sound is caused by the motor.
The customer also noticed marks on clothes after drying. Irregular drum support can allow abnormal drum movement, increasing the possibility of rubbing or trapping at internal contact points. Marks may also result from an existing damaged drum seal, accumulated residue or contact with a worn component.
In this job, damaged drum support rollers were confirmed. However, the precise mechanism responsible for each clothing mark was not separately recorded. Inspecting the drum's alignment, seals and surrounding surfaces during roller replacement is therefore important.
These symptoms are indicators only. The faulty component should be confirmed through inspection.
The recommended repair for this LG dryer is to replace the damaged drum support rollers with compatible parts. During the work, the technician should also check the roller shafts or mountings, drum-contact surfaces, belt, belt tensioner and accessible drum seals for associated wear.
After replacement, the drum should rotate freely and the appliance should be tested through an appropriate operating cycle, checking for abnormal noise, vibration and contact with internal parts. A final check of the drum interior can help reduce the chance of further clothing damage.
The recommended replacement does not mean that this repair has already been completed.
If your dryer develops a pronounced scraping or banging noise, or if it begins damaging clothes, stop using it until the cause is checked. Continuing to operate a dryer with damaged drum supports may increase mechanical wear and cause additional damage to the belt, drum or nearby components.
Do not attempt to reach into the appliance or remove protective panels while it is connected to power. Internal inspection and parts replacement should be undertaken safely by a competent technician.
Replacing drum support rollers can be a practical repair when the rest of the dryer is in good condition and compatible parts are available. The final decision depends on the model, overall wear, parts cost and labour required.
For the Palm Beach LG dryer, replacement of the damaged rollers was identified as the necessary next step.
ISB Electrical investigates LG dryer noises, mechanical drum faults, heating problems and electrical issues across Palm Beach and nearby southern Gold Coast suburbs. If your dryer is making a new rumbling noise or leaving marks on laundry, a proper inspection can identify the component requiring attention.
Explore our Dryer Repairs Gold Coast, LG Appliance Repairs Gold Coast and Appliance Repair Palm Beach pages for further information.
Contact ISB Electrical with your dryer model number and a description of the noise or clothing marks. We provide appliance fault diagnosis in Palm Beach and surrounding Gold Coast suburbs.
Call 0422 993 777Possible causes include damaged drum support rollers, worn belt tensioner components, motor bearings or objects contacting the drum. In this Palm Beach case, damaged drum support rollers were identified.
Worn drum supports can allow abnormal drum movement and contact that may contribute to clothing marks. Other causes include worn seals or residue inside the drum. The Palm Beach dryer had damaged rollers, but the precise cause of each mark was not separately documented.
On models fitted with replaceable support rollers, compatible replacement parts may be available. The correct parts depend on the LG dryer model and the condition of the supporting components.
Stop using the dryer and arrange inspection. Continued operation with damaged support components may increase mechanical damage and could damage more clothes.
ISB Electrical accepts enquiries for LG dryer fault diagnosis in Palm Beach and surrounding Gold Coast suburbs. Call 0422 993 777 with the dryer model and symptoms.
LG dryer drum support roller fault diagnosed in Palm Beach, Gold Coast.
Please feel free to contact us for
Any electrical & appliance services - installation, repairs, maintenance
© 2026 ISB Electrical. All rights reserved.