Fisher & Paykel Ceramic Cooktop Not Working – Currumbin

Fisher & Paykel Ceramic Cooktop Not Working – Currumbin

A customer in Currumbin contacted ISB Electrical because their Fisher & Paykel ceramic induction cooktop was not working correctly. Two cooking zones were not functioning, while the remaining parts of the cooktop still had power.

When two elements on an induction cooktop stop working at the same time, the fault is often related to the electronic control system rather than both elements failing separately. Induction cooktops use power control boards to operate the cooking zones, sensors and switching circuits.

Inspection and Diagnosis

• Checked the cooktop power supply and electrical safety condition
• Confirmed the cooktop had power
• Tested all cooking zones individually
• Confirmed two induction elements were not functioning
• Checked user controls and zone response
• Inspected the internal electronic control area
• Checked for signs of heat damage or electronic failure
• Confirmed the faulty component before advising repair options

Fault Found

The fault was caused by a blown control board. The failed board was no longer operating the affected cooking zones, which caused two elements on the induction cooktop to stop functioning.

Because the control board controls power delivery to the induction zones, a board failure can cause one side or multiple cooking zones to stop working even though the cooktop still appears to have power.

Repair Required

The faulty control board required replacement. After replacing the board, the cooktop should be tested on all cooking zones to confirm correct heating operation, control response and safe operation.

The customer was advised not to continue using the affected cooking zones until the control board fault was repaired, as electronic faults inside induction cooktops can worsen and may affect other components.

Common Causes of Fisher & Paykel Cooktop Not Working

• Blown induction control board
• Faulty power module for cooking zones
• Failed electronic relay or switching circuit
• Damaged touch control or user interface
• Overheating inside the cooktop
• Faulty temperature sensor
• Loose or damaged internal wiring connection
• Power supply or isolation switch issue

Fisher & Paykel Cooktop Repairs Gold Coast

ISB Electrical provides professional Cooktop and Oven Repairs Gold Coast, including ceramic cooktops, induction cooktops, faulty elements, blown control boards, touch control problems, tripping power and heating faults.

We also provide Fisher & Paykel Appliance Repair Gold Coast for Fisher & Paykel cooktops, ovens, dishwashers, washing machines, dryers and refrigerators.

If your Fisher & Paykel ceramic or induction cooktop is not working, has dead cooking zones, touch control problems or a blown control board, contact ISB Electrical for professional diagnosis and repair in Currumbin and across the Gold Coast.