Westinghouse Dishwasher Not Draining in Southport
ISB Electrical attended a Westinghouse dishwasher repair job in Southport where the customer reported that the dishwasher was not draining properly at the end of the cycle.
A dishwasher drainage fault can be caused by a blocked filter, restricted drain hose, faulty drain pump, blocked sump area or an issue with the control circuit. In this case, the drain system was inspected and the fault was traced to the dishwasher drainage system.
Fault Found
During diagnosis, we checked the drain pump, filter area, drain hose and internal sump. The dishwasher was holding water because the drainage system was restricted and the drain pump operation needed attention.
Repair Carried Out
The drain system was cleared and the dishwasher was tested through the drain cycle. After the repair, the dishwasher was able to remove water correctly and complete the cycle normally.
Common Causes of Westinghouse Dishwasher Drainage Problems
- Blocked dishwasher filter
- Blocked or kinked drain hose
- Food debris in the sump area
- Faulty drain pump
- Blocked kitchen sink spigot connection
- Control board not sending power to the pump
Westinghouse Dishwasher Repairs Gold Coast
ISB Electrical repairs Westinghouse dishwashers across Southport and the Gold Coast. We diagnose drainage faults, pump problems, filling issues, leaking, poor washing performance and electrical faults.
If your Westinghouse dishwasher is not draining, not filling, leaking or showing an error code, contact ISB Electrical for professional dishwasher repair service on the Gold Coast.
Westinghouse Appliance Repair Gold Coast | Dishwasher Repairs Gold Coast | Appliance Repair Southport
