ISB Electrical attended a Westinghouse dishwasher repair job in Parkwood after the customer reported that the dishwasher stopped during a wash cycle and displayed an F2 error code.
The dishwasher would start normally, but part way through the cycle the machine stopped operating and the error appeared on the display.
The customer advised that the dishwasher had stopped mid-cycle with water still inside the appliance. Resetting the dishwasher did not permanently clear the fault and the F2 error returned during operation.
We inspected the heating circuit, NTC temperature sensor, wiring harness, connectors and main control board.
Electrical testing was carried out on the NTC sensor to check whether the resistance reading changed correctly with temperature.
Testing confirmed that the NTC temperature sensor was faulty and providing incorrect temperature information to the control board.
Because the dishwasher could not accurately monitor water temperature, the control system stopped the wash cycle and displayed the F2 error code.
The faulty NTC temperature sensor was replaced and the wiring connections were checked.
After replacement, the dishwasher was tested through a complete wash cycle. The appliance completed the cycle normally and the F2 error did not return.
If your Westinghouse dishwasher is showing an F2 error in Parkwood or nearby Gold Coast suburbs, ISB Electrical can diagnose the fault and provide a practical repair solution.
Westinghouse Appliance Repair Gold Coast | Dishwasher Repairs Gold Coast | Appliance Repair Parkwood
Please feel free to contact us for
Any electrical & appliance services - installation, repairs, maintenance
© 2026 ISB Electrical. All rights reserved.