Is your washing machine not draining /spinning?

It is a common problem with front loading and top loading washing machine and it is caused by blockage in pump chamber. If you open the pump chamber water will be gushing out, so make sure you unplugged the washing machine and contact professionals from ISB Electrical.

Is your fridge water leaking?

Old fridges have drains to remove the moisture accumulated on the evaporator coils which gets unblocked by the mould and water comes to a tray at the rear of the refrigerator and uses the heat from the compressor to evaporate. You can sometimes clear the drain from the rear of the fridge if you can see the drain hose. But it is better to call ISB Electrical for professional’s assistance.

Are you not able to regulate the temperature of your oven / hotplates?

This is a very common issue and it causes due to the failure of your oven thermostat or your cook tops central control. Stove and oven repairs must be performed by a qualified and experienced repairer and ISB Electrical has the expertise to help you out.

Omega induction cooktop not heating repair in Surfers Paradise by ISB Electrical

Omega Induction Cooktop Not Heating – Surfers Paradise Repair

Published: 4 May 2026

A customer in Surfers Paradise contacted ISB Electrical because their Omega induction cooktop was not heating properly. The cooktop powered on, but one of the cooking zones failed to generate heat when a pot was placed on it.

Call Now: 0422 993 777

Problem

The induction cooktop turned on and responded to controls, but one element was not heating. Other zones were working normally. This is a common issue in induction cooktops and usually indicates a fault in the power electronics or coil system.

Diagnosis

We carried out a full inspection of the induction module, power supply, internal wiring and control system. Testing confirmed that the faulty zone was not receiving correct power from the induction control board.

In many Omega induction cooktops, this type of fault is related to a failed semiconductor component (IGBT module) and a damaged circuit on the main power control board.

Repair

The faulty component in the power control system was identified and repaired. After completing the repair, the cooktop was tested across all zones and power levels.

The induction cooktop returned to full working condition, with all elements heating correctly and operating safely.

Why Induction Cooktops Stop Heating

Faulty induction coil
IGBT or power module failure
Main control board fault
Sensor or communication error
Incorrect cookware detection
Overheating protection triggered

Need Induction Cooktop Repair in Surfers Paradise?

Induction cooktop repairs
Cooktop not heating faults
Power module and PCB repairs
Appliance repair Surfers Paradise

Cooktop & Oven Repairs Gold Coast

Appliance Repair Surfers Paradise

Call: 0422 993 777

Omega Induction Cooktop Not Heating – Surfers Paradise Repair

Problem

Diagnosis

Repair

Why Induction Cooktops Stop Heating

Need Induction Cooktop Repair in Surfers Paradise?

Get Your Quote or Call: 0422 993 777

Our Services

Contact Information